We are using cookies on this web site to provide a in order to provide you the best online experience.

More about data procetion, and a link to the inmpressum (both in German).

Common alarm indicator LSA
Home Products Shop Distributors About us Contact Support Links Search Sitemap
DE
EN
Products > Local alarming annunciators > LSA > LSA Common alarm indicator >
Sammelmelder LSA
Description
Function diagram
Schematic
Programming
Technical data
Order overview
Downloads
Common alarm indicator LSA





TS200 Important information about the LSE

  • Actually, only the versions with output relais are available






  • Description

    General

    The LSA annunciator system is made up of two function modules. These can be either used alone or in combination, depending on the particulars of the application.

    1. Master module with single indication
    The master module contains the horn output (relay contact) and group alarm (relay contact) functions required for a complete alarm system. There are also 8 signal inputs which control a group alarm relay. Each fault alert received by the master module inputs is indicated as a continuous light on the integrated LED. 8 lamp outputs are available for the use of additional, external indicator lamps.

    2. Group module with individual indication
    The group module is configured for 8 signal inputs which work on a group relay. The group module can be used for basic alarm requirements without a master module, when only the group alarm (relay) and the single- group display are required. Each incoming fault alert is indicated by an LED assigned to the respective input. 8 lamp outputs are available for the use of additional, external indicator lamps.

    3. Loss of voltage
    Active alerts will be retained even if the operating voltage is disconnected.

    Function

    Each incoming fault alert is indicated via a continuously lit LED.br>
    1. Common alarm (master module only)
    The relay for common alarm remains energized as long as any group alarm is present. Once a group alarm is no longer present, the relay will return to its normal state.

    2. Group alarm
    The relay for group alarm remains energized for as long as a fault alert for the assigned group is present. Once the last fault has been fixed, the relay will return to its normal position.

    3. Horn
    The horn relay is energized by the first incoming fault alert. The horn relay can be reset at the Input HQ. The horn relay energizes again if any other fault alerts arrive. The horn relay will remain energized until it is acknowledged, even if the fault alert is no longer present.

    4. Lamp test
    All the modules come with a special lamp test switch. If a signal intrudes at the lamp test input, a relay in the module will take up the lamp test. This relay is used to relieve the button for the lamp test as the auxiliary relay takes up all the lamp current. A specially developed switch can also be used to enable a lamp test in AC operation. When using AC, the lamp check works with pure alternating current and not with half-waves, which is the generally accepted method. There is no loss of brightness.



    Function diagram


    The group relay remains energized for as long as any alert of the corresponding group module is still active. Once the fault contact becomes active, the visual indicators will immediately show a continuous light. They are active in parallel with the fault contacts.


    LSA



    Schematic


    Please click on the image for a larger view or download the diagram sheet

    LSA



    Programming


    The LSA is programmed by a DIP-switch as followed:

    LSA



    Technical data

    Signal inputs 8
    Operating voltage 20-30VDC
    Max. permissible ripple max. 15%
    Power consumption max. 1W
    Temperature range -20 - +70°C
    Installation position any
    Switching capacity (relay contacts) 250VAC 5A
    Protection category Housing: IP40/terminals: IP20
    Connections 4mm2 (2x1.5mm2)
    Weight 300g
    Dimensions WxHxD 99.7x75x110mm




    Order overview

    Part number Image Description Shop
    LSA08-511.001 Störmelder LSA Master module, common alarm indicator with LED display
    LSA08-511.002 Störmelder LSA Group module, common alarm indicator with LED display





    Downloads