We are using cookies on this web site to provide a in order to provide you the best online experience.

More about data procetion, and a link to the inmpressum (both in German).

Common alarm indicator LSB
Home Products Shop Distributors About us Contact Support Links Search Sitemap
DE
EN
Products > Local alarming annunciators > LSB >
Sammelmelder LSB
Description
Function
Technical data
Schematic
Order overview
Downloads
Common alarm indicator LSB





Description

The LSB annunciator system is a common alarm indicator for 230V AC or 24V AC/DC. It is made up of two function modules. These can be either used alone or in combination, depending on the particulars of the application.

Master module
The master module contains the horn output (relay contact) and group alarm (relay contact) functions that are required for a complete alarm system. In addition, there are also 4 signal inputs which control a group alarm relay. All incoming fault alerts to the master module inputs are indicated by continuously lit integral LEDs. 4 outputs are available for use with additional, external indicator lamps.

Group module
The group module is configured for 8 signal inputs which affect a group relay. The group module can be used for basic alarm requirements without a master module, when only the group alarm (relay) and the single- group display are required. Each incoming fault alert is indicated by an LED assigned to the respective input. 8 outputs are available for use with additional, external indicator lamps.



Function

Each incoming fault alert is indicated by a continuous light and the associated output is activated. The relay for the super-ordinated group alarm is also energized on the master module. The group relay (only on the associated module) is also energized

The first incoming fault alert energizes the horn relay. The horn relay can be reset at the Input HQ. The horn relay can only be energized again once all faults have been removed. If an acknowledgement is not made, the horn relay will return to the normal state by itself, if a message is no longer present.

All modules with individual indication come with a special lamp test switch. If a signal intrudes at the lamp test input, a relay in the module will take up the lamp test. This relay serves to relieve the button for the lamp test as the auxiliary relay takes up all the lamp current. A specially developed switch can also be used to enable a lamp test in AC operation. When using AC, the lamp check works with pure alternating current and not with half-waves, which is the generally accepted method. For the user, this means that transformers or voltage reducers can be used without problem, and without diminishing the brightness of the indicators.


Function diagram


LSB




Technical data


24V AC/DC version 230V AC version
Number of alerts Master module 4/ Extension module 8 Master module 4/ Extension module 8
Supply- and alarm voltage 24VAC/DC +-15% 230VAC +-15%
Power consumption max. 2W max. 5W
Response time approx. 100ms approx. 100ms
Recovery time approx. 500ms approx. 500ms
Switching capacity (relay contacts) 4A 230V 4A 230V
Connections max. 4mm2 or 2x1,5mm2 max. 4mm2 or 2x1,5mm2
Installation position any any
Weight approx. 150g approx. 150g
Dimensions 77x90x45mm 77x90x45mm




Schematic


Please click on the image for a larger view or download the diagram sheet

LSA



Order overview

Part number Image Description Shop
LSB04-411.001 Störmelder LSB Master module, 4 inputs 24V AC/DC
LSB08-411.002 Störmelder LSB Group module, 8 inputs 24V AC/DC
LSB04-422.001 Störmelder LSB Master module, 4 inputs 230V AC
LSB08-422.002 Störmelder LSB Group module, 8 inputs 230V AC





Downloads