We are using cookies on this web site to provide a in order to provide you the best online experience.

More about data procetion, and a link to the inmpressum (both in German).

TS200 IM 24 input module
Home Products Shop Distributors About us Contact Support Links Search Sitemap
DE
EN
Products > Discontinued annunciators > TS200 > IM 24 >
TS200 IM
Description
View
Schematic
Technical data
Downloads
TS200 IM 24 input module





Description

The IM 24 input module has eight digital inputs each having an input voltage of 24V DC. An input module always forms the beginning of a node. The node is addressed at the input module. The digital inputs are wired on a 10 pole terminal block. All inputs have a common 0V connection (GND) and are galvanically isolated from the logic of the module.




View


TS200 IM (1) labelling strip (node number)
(2) Green LED lights when UB (24V DC bus) OK
(3) Green LED lights when UL (5V DC logic) OK
(4) Green LED lights when bus communication (BUS) OK
(5) DIP switch for addressing and transfer rate at the bus
(6) bus connection with integrated supply (UB, 24V DC)
(7) no (LED) function
(8) terminal socket houses terminal blocks
(9) Green LED lights when input active
(10) labelling strips (input channels)
(11) connector plug for IE/OE extension modules






Schematic


TS200 CM




Technical data

Digital inputs (IEC1131-2)
Input voltage:
Signal = 0
Signal = 1
Limits
Input current (at +24 VDC)
Input resistor
Connecting cable for sensor
Shielding
8

0 VDC NOM (< +5 VDC)
+24 VDC NOM (> +14 VDC)
-36 .. +36 VDC
6 mA
typ. 3.9 kOhm
max. 100 m
not required
Bus connection
CAN (ISO 11898)
UB power supply
Operation range
Limits
Power consumption:
Without IE / OE
Full configuration
+24 VDC NOM
+18 .. +36 VDC
-36 .. +36 VDC

max. 2.1 W
max. 9 W
Electrical isolation
Supply / Logic and bus
Inputs / Logic and bus
Inputs / Inputs

yes
yes
no
Ambient temperature
Operating
Storage

0 to +55 °C
-25 to +70 °
Protection category
IP 40
Dimensions (W x H x D) in mm 100 x 58 x 85
Weight
220 g





Downloads