This menu gives an overview of the actual states of the inputs including the system inputs.
Timestamp when state has changed lastly.
Accurate Description of the inputs.
| DIN: | Digital input |
| AIN: | Analog input |
| SYS: | System input |
This is the name of the input which has been entered in the menu Setup - Inputs.
Actual state of fault messages. These are the possible values:
| Possibility 1: | |
| 1ahl: | State message set active |
| 1Ahl: | Fault message set active |
| 1AHl: | Horn has been acknowledged |
| 1AHL: | Fault message has been acknowledged |
| 0ahl: | Fault has been eliminated (normal state) |
| Possibility 2: | |
| 1ahl: | State message set active |
| 1Ahl: | Fault message set active |
| 0Ahl: | Fault has been eliminated meanwhile |
| 0AHl: | Horn has been acknowledged |
| 0ahl: | Fault message has been acknowledged (normal state) |
| Possibility 3: | |
| 1ahl: | State message set active |
| 1Ahl: | Fault message set active |
| 1AHl: | Horn has been acknowledged |
| 0AHl: | Fault has been eliminated meanwhile |
| 0ahl: | Fault message has been acknowledged (normal state) |
Measured value from analog inputs and system inputs. For analog inputs can the scaling (scale and unit) be changed in the menu Setup - Inputs - Analog inputs. For system inputs the scaling is fixed.
This menu gives an overview of the actual states of the outputs.
Timestamp when state has changed lastly.
Accurate Description of the outputs.
| DOT: | Digital output |
This is the name of the output which has been entered in the menu Setup - Outputs.
Actual state of outputs. These are the possible values:
| Open: | Output switch is open |
| Toggling: | Output switch closes and opens alternately (blinking) |
| Closed: | Output switch is closed |
By remote switching the relay contacts can be switched in the webinterface if the function is enabled in Setup->Outputs. For using remote switching you'll have to log in with your password.
| : | Close output switch |
| : | Open output switch |